The anyfeed SXM340 is a flexible bulk parts feeder with an integrated bulk storage bin that can hold components of arbitrary shapes and materials. When combined with flexfactory’s vision solution or and your robot of choice, the anyfeed SXM340 becomes a highly versatile robot feeding system that offers solutions for a wide range of application requirements. Controlled by the vision system, the anyfeed SXM340 uses its servo-electric drives to move the components into positions that can be easily picked by the robot.
The anyfeed SX line of feeders is based on a feeding method patented by flexfactory that does not require high maintenance conveyor belts or expensive recirculating systems. The ‘first-in-first-out’ principle of the anyfeed SXM340 is an efficient and reliable handling method that ensures parts spend as little time as possible in the feeding system, waiting to be picked.
Perfect for the flexible feeding of parts in assembly, inspection, packaging, counting and machine-loading processes.
Feeders in the anyfeed SX/SXM series are not suitable for: foods, environments with explosion hazards or wet, very dirty or very oily parts.
* Must be ordered in this way, cannot be retrofitted.
|Part requirement||dry, clean and between 5-45°C|
|Recommended part size||110 mm|
|Minimal part size||0.5 mm|
|Maximum part weight||80 g|
|Part material||metal, plastic, glass (stable)|
|Bulk storage capacity||15l/12kg|
|Pick Window (width by length)||340x430 mm|
|Pick Window (area)||1462 cm2 (34x43cm)|
|Permissible load inside pick window||1500g|
|Pick up level||255mm|
|Clearance in purge-channel||89 mm|
|Supply Power||24 VDC/10 A|
|Typical electrical consumption||100 W (depens on the operation)|
|Compressed air||≤ 6 bar unoiled, filtered|
|Eccentricity feeder platform||± 12 mm (Maximal stop at the front – from basic position)|
|Eccentricity bulk bin||± 5 mm|
|COM Interface||RS232 (DSUB9 Connector)|
|Drive units||2 Brushless servomotor|
|Ambient temperature||5-45 °C|
|Humidityt||95 % non condensing|
|Feeder weight||55 kg|